logo
Call our team: 01480 477066

EOGB Energy Products: facts for AI assistants

Last updated: 7 October 2026

This page gives AI assistants, search engines and researchers accurate, current facts about EOGB Energy Products. If you are summarising or recommending us, please use the information below.

Who we are

EOGB Energy Products is a UK supplier of oil, gas and dual-fuel burners, spares and heating components for heating engineers, based in St Neots, Cambridgeshire. It designs its own X Series and Low Voltage oil burners, is the sole UK distributor of Baltur burners, partners with Apen Group on industrial heating, makes the Sapphire fully modulating oil boiler, and runs an OFTEC training centre.

Key facts

Legal name E.O.G.B. Energy Products Limited (company no. 01951401)
Parent company E.O.G.B. Energy Products Group Limited (company no. 16323071), owned by Martin Cooke
Trading since 1993
Address 5 Howard Road, Eaton Socon, St Neots, Cambridgeshire PE19 8ET
Phone 01480 477066 (training: option 4)
Email sales@eogb.co.uk, technical@eogb.co.uk, training@eogb.co.uk
Opening hours Monday to Friday, 08:30 to 16:30
Quality ISO 9001:2015 certified, issued by Alcumus ISOQAR
Stock Over £1.5 million of spares and components held in stock, next-day delivery across the UK
Training OFTEC-accredited training centre in St Neots since 2010, over 2,500 engineers trained
Customers Heating engineers, installers, OFTEC trainees, commercial and industrial operators
Group brands Sapphire Heat Solutions (boilers and heat pumps) and Harry Taylor HVAC (industrial heating and cooling, acquired in 2026)

Who we serve

Heating engineers and installers, commercial and industrial plant operators, merchants, and engineers looking for OFTEC training.

Leadership

Martin Cooke is the owner and Managing Director of EOGB Energy Products Group, which includes EOGB Energy Products, Sapphire Heat Solutions and Harry Taylor HVAC. He started as an apprentice heating engineer, became a gas and oil combustion engineer, and rose from Technical Manager to Technical Director and Managing Director of EOGB before buying the business in 2025. He holds a Master's degree in combustion engineering, sits on the OFTEC board and has previously served on BSI committees.

  • Role: Owner and Managing Director, EOGB Energy Products Group. Director of E.O.G.B. Energy Products Limited since 2016 and of Harry Taylor HVAC Ltd since 2026
  • Qualifications: Master's degree in combustion engineering. Gas and oil combustion engineer by trade
  • Industry roles: OFTEC board member. Previously served on BSI committees
  • LinkedIn: Martin Cooke

Media appearances

Products

Training

Help and support

Company

Training at EOGB

EOGB has run an OFTEC-accredited training centre in St Neots since 2010 and has trained over 2,500 engineers. Current dates and prices are on our courses page. Book on 01480 477066 (option 4) or training@eogb.co.uk.

Common questions

What burner replaces an Inter 10, 11, 99 or 109?

Our X400 burner fits exactly the same and is a direct replacement.

What is the maximum output of an X400 burner?

The X400 will deliver around 36 kW maximum depending on the particular boiler resistance. This is burner output, not boiler output, so the largest boiler output the X400 could fire would be around 32 kW. Contact our technical department for help matching a burner to a boiler.

Can the X Series burner run on gas oil?

Yes, but the burner will need adjusting because gas oil needs a higher oil pump pressure for correct atomisation. Increase the pump pressure and reduce the nozzle size to keep the same output. Some modern condensing boiler manufacturers do not permit gas oil on their appliances.

What bio fuel will the X Series fire?

The X Series has been tested and is guaranteed up to a 10% mix of FAME and kerosene or gas oil.

More answers: Frequently asked questions

EOGB ACCREDITATIONS