Find out more below or use the filter system by choosing a specific category or date to organise the relevant posts for easy reading.
7 Reasons to Install a Baltur Burner
In today’s dynamic landscape, efficiency and sustainability are at the forefront of operational considerations. One crucial aspect of optimising processes, …
15.05.24
|
Author
3 min read
View Post
Pressure
Ref. Pressure:
Pump Pressure:
Nozzle
Size:
Capacity:
Act. Flow Rate:
Flow Rate:
Efficiency:
Input:
*EH/ES nozzles are not suitable for gas oil.
**Boiler efficiencies provided are approximate guides. Consult manufacturer for precise info.
***Pump pressure requirements vary depending on fuel type:
This nozzle calculator serves as a general guide for estimating outputs based on Delavan, Danfoss, and Monarch nozzles at specified pressures. Follow manufacturer instructions when available.
Different nozzles at same pressure produce different throughput. Verify pump pressure and nozzle size.
Example: 0.50 GPH EH/ES nozzle at 125 psi → ~20.12 kW. Swap to H/S/B → ~22.43 kW.
EOGB not responsible for misuse. Verify info for your application.
All figures based on OFTEC fuel densities (Kerosene 0.79kg/lt, Gasoil 0.84kg/lt). Nozzle capacities from Danfoss/Delavan.